10 / 8 F Rubber Slurry Pumps , Brand New Natural Rubber Slurry Pumps
Introduction:
10/8F-R is a 8 inch rubber slurry pump in discharge, which is also the best sold model among R rubber lined slurry pumps.
This pump is widely used for pumping fine coal, fine sand, and is mainly installed in coal washing plants, glass factory and quarries.
The wetted parts are exchangeable with the metal liners completely. The duration time of the wetted parts is quite satisfying.
SME SHR rubber pump can also be used for chemicals, because the material soft black rubber R55 is suitable for slurries with a pH value ranging from 2~4. Therefor, SME SHR slurry pumps are also chemical processing slurry pumps.
Rubber lined slurry pumps are as important as hard metal slurry pumps, and more and more applications where metal lined slurry pumps are being used are now started to be installed with rubber lined slurry pumps.
Specifications:
| Model | SHR-200F |
| Outlet | 8-inch |
| Capacity | 540-1188m3/h |
| TDH | 12-50m |
| Rated Motor Power | 260Kw |
| Speed | 400-750r/min |
| NPSH | 4-12m |
Construction of Rubber Slurry Pump:
Typical Applications:
Tailings
Heavy Mining
Ash Handling
Cyclone Feeds
Pulp and Paper
Corrosive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Heavy Refusal Removal
Standard Material of Wet-end Parts: Natural Rubber R55:
| Natural Rubber R55 | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) | 3-12≤65℃
|
Performance Curve:
Product Tags:
|
|
10 / 8 F Rubber Lined Slurry Pumps , Single Stage Natural Rubber Slurry Pump Images
|
